Aroma Professional AEM-810 Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кавоварка Aroma Professional AEM-810. Aroma Professional AEM-810 12 сторінок.

Troubleshooting

(Cont.)

There is no coffee coming out of the

espresso machine.

· The Water Reservoir is empty. Fill water between the

minimum and maximum line.

· The coffee grind is too fine. Grind coffee to medium

ground.

· There is too much coffee in the filter. Try putting less

coffee into the filter.

· Coffee has been compressed too much. Refill the Shot

Cup with coffee and do not tamp it.

Coffee comes out around the edge of the

filter holder.

· Filter holder is not fully locked into position.

· Coffee grounds collected around the Portafilter.

Remove all excessive coffee ground on the rim.

· There is too much coffee in the filter. Try putting less

coffee into the filter.

No steam is being generated.

· The Water Reservoir is empty. Fill water between the

minimum and maximum line.

· The appliance is not turned on. Turn on unit and follow

the operating instructions.

· The Steam Wand is blocked. Turn off the unit, allow it to

cool. Then unplug it and clean out Steam Wand with a

needle or toothpick.

Milk is not foamy after frothing.

· The appliance ran out of water to create steam. Ensure

that there is enough water in the reservoir.

· Milk is not cold enough. Chill milk and frothing pitcher

prior to making cappuccino.

Coffee comes out too quickly.

· The coffee ground is too coarse. Use a finer grind.

· There's not enough coffee in the removable Shot Cup.

Use more coffee.

Note:

· If the problem persists,

please contact our

customer service

department toll-free

at ( 800 ) 276-6286

or through email at

CustomerService@

AromaCo.com.