3D Printing Systems UP Mini Heater Bed v2 Інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу для 3D-принтери 3D Printing Systems UP Mini Heater Bed v2. 3D Printing Systems UP Mini Heater Bed v2 3 сторінки.

Друкувати сторінку

With the bed flipped over, slide the

brown tab of the bed FPC

connector towards the rear of the

bed to release it, allowing the flex

cable to easily slide out.

On the UP Mini Bed+, open the

FPC connector in the same

manner as previously. Then with a

cloth on top of the build platform,

place the UP Mini Bed+ upside

down on the build platform with its

FPC connector closest to the rear

of the printer.

Ensuring that the silver contacts

are facing down onto the bed and

the blue plastic shown on the rear

of cable is visible and facing away

from the bed, insert the FPC cable

into the connector;

Push the brown tab of the

connector towards the front of

the printer to lock the cable in

place, then flip the UP Mini Bed+

over such that the FPC cable is no

longer twisted.