Aroma360 Davinci360 Посібник з усунення несправностей - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з усунення несправностей для Аксесуари Aroma360 Davinci360. Aroma360 Davinci360 2 сторінки.
Також для Aroma360 Davinci360: Посібник користувача (2 сторінок)
Друкувати сторінку
1. Check that the power cord is securely plugged into the wall and di user.
2. Ensure there is oil in the fragrance canister.
3. Ensure the bottle is tightly secured and threading is properly lined up.
4. Unscrew the oil bottle and ensure oil pipette is attached to the inside of the atomizer. Also check to see that the pipette is long enough to
reach the bottom of the oil bottle.
5. Ensure the di user is in an upright position and is placed in an open area so the scent can travel without obstruction.
6. Ensure the fan setting is switched on for optimal scent dispersion
1. The di user works on military time. The time on the display should correspond to the current time. To adjust the current time, press
set, use the up and down arrows and press set to confirm.
2. Reset the di user to factory settings by pressing "mode" for 30 seconds until you hear a beep. Factory settings are 8am-10pm at 60%.
3. When display says "work, on", it means the di user is in a "working" interval and should be emitting air pressure from the top of the di user.
Setup
Settings
NW MIAMI CT, MIAMI, FL,
| (561)206-0053