Abbott FreeStyle Libre 2 Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Глюкометр для вимірювання рівня глюкози в крові Abbott FreeStyle Libre 2. Abbott FreeStyle Libre 2 2 сторінки. Flash glucose monitoring system 4.5”
Також для Abbott FreeStyle Libre 2: Початок роботи (9 сторінок), Посібник із швидкого старту (2 сторінок), Початок роботи (15 сторінок), Посібник (12 сторінок), Початок роботи (15 сторінок)

Друкувати сторінку

Abbott FreeStyle Libre 2 Посібник із швидкого старту

FLASH GLUCOSE MONITORING SYSTEM

Quick Start Guide for

FreeStyle Libre 2 Reader

●

Assemble and Apply Sensor to the back of your upper arm

STEP 1

Select site on back of upper arm.

Do not use other sites as these may

result in inaccurate glucose readings.

Note:

Avoid scars, moles, stretch

marks, lumps, and insulin injection

sites. To prevent skin irritation,

rotate sites between applications.

STEP 4

Line up dark mark on Sensor

Applicator with dark mark on

Sensor Pack. On a hard surface,

press down firmly on Sensor

Applicator until it comes to a stop.

STEP 7

Place Sensor Applicator over site

and push down firmly to apply

Sensor.

CAUTION:

Do not push down on

Sensor Applicator until placed

over prepared site to prevent

unintended results or injury.

Setup Overview

Refer to your User's Manual for full System instructions and information.

Reader

USB Port

Sensor

Pack

Codes on labels

must match

STEP 2

Wash site using a plain soap,

dry, and then clean with alcohol

wipe. Allow site to air dry before

proceeding.

STEP 5

Lift Sensor Applicator out of

Sensor Pack.

STEP 8

Sensor

Gently pull Sensor Applicator

away from your body.

●

Touchscreen

Home Button

●

Sensor

Applicator

●

CODE XXX

Peel lid completely off Sensor Pack.

Unscrew cap from Sensor Applicator.

CAUTION:

must match on Sensor Pack

and Sensor Applicator or

glucose readings will be

incorrect.

Assemble and Apply

Sensor to your body

Start new Sensor with Reader

Wait 60 minutes

for start-up

Check your glucose whenever you

want for up to 14 days.

STEP 3

Cap

Lid

Sensor codes

Sensor Pack | Envase del sensor

Customer Service | Atención al clien

CODE

STEP 6

Sensor Applicator is ready to

apply Sensor.

CAUTION:

Sensor Applicator

now contains a needle. Do not

touch inside Sensor Applicator

or put it back into Sensor Pack.

STEP 9

Make sure Sensor is secure.

Discard used Sensor Applicator

and Sensor Pack according to

local regulations.

1-855-632-8658

XXX

XXXXXXXXXXX

YYYY-MM-DD