AromaTech AromaPro Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари AromaTech AromaPro. AromaTech AromaPro 19 сторінок.

TUBE CONNECTION ON AIR DUCT

The best location for the Scent Machine is below the Scent Point.

The air tube should run upward as short a distance as possible

and NEVER MORE THAN 3 FEET. If an upward air tube run is not

possible, care should be taken to support the hose to prevent

sagging or any low spots in the run to avoid any possibility of

condensation and liquid collection which will block the scent

output. Give the air tube an upward slant along its run.

Diffusing the scent via HVAC will allow you to cover multiple

rooms and zones. To scent the right zones, check with your HVAC

provider or Mechanical Engineer to determine which HVAC unit to

connect to.

CONNECTING THE DIFFUSER TO HVAC

You will want to choose the air handler you want to connect

to. If you have multiple air handlers select the one that

will cover the area you wish to be scented. Consult your HVAC

supplier if needed.

With a metal drill bit designed to drill through sheet metal,

drill a hole the size of the hose guide in the air duct

directly after the blower. Make sure you are tapping into the

supply side of your duct, not the return side.

IMPORTANT: Never install before the coils or filters as the

filters will dilute the scent and you will not get the same

result.

Once the hole is made, insert the hose guide. The hole on the

end of the hose guide should be pointing with the air flow

not against it. This allows the scent to travel in the same

direction as the air flow.

Secure the hose guide by screwing it to the duct.

Screw in the supplied HVAC adaptor into the hose guide.

Take a second HVAC adaptor and screw it into the AromaPro.

Either wall mount the AromaPro to the duct, the wall or place

on a shelf directly under the Scent Point connection. It's

important to keep the AromaPro as close as possible to the

scent point. MAX AIR TUBE LENGTH SHOULD BE 3 FEET