Acoustic Class D NEO Dymium Series Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач Acoustic Class D NEO Dymium Series. Acoustic Class D NEO Dymium Series 16 сторінок. Bass amplifiers

Друкувати сторінку

Acoustic Class D NEO Dymium Series Посібник користувача

BASS AMPLIFIERS OWNER'S MANUAL

B600HD BACK PANEL

1. AC Power Connection and Fuse: Connect included IEC power cable here. Fuse cap contains fuse for circuit protection

2. Power: Turns the amplifier on to ready for use

3. Speaker Outputs : 1/4" speaker jack and locking-barrel type jack for attaching external speakers (minimum 4 Ohm total load)

4. Link Out: Output to another Acoustic™ bass head. Allows user to run the B600HD in Master Mode to control another amp head.

This allows the user to link 2 heads together for more power and speakers controlled from one master amplifier

5. Link In: Input from another Acoustic™ bass head. Allows user to run the B600HD in Slave Mode controlled from another amp

head. This allows the user to link 2 heads together for more power and speakers controlled from one master amplifier

6. Effects Send: 1/4" two-conductor jack sends signal to an external effects or signal processing device

7. Effects Return: 1/4" two-conductor jack returns signal from an external effects or signal processing device

8. Footswitch: 1/4" Tip/Ring/Sleeve jack for attaching optional 2 button latching footswitch. Controls Overdrive on/off and

effects loop on/off

9. Tuner Send: Attach electronic instrument tuner via 1/4" 2 conductor instrument cable

10. Direct Output: XLR direct balanced output connector jack for connection to external PA or direct box

11. Pre/Post EQ Switch: Switches direct balanced output between pre and post EQ operation

12. Level: Adjusts the level of the direct output signal

13. Ground Lift: Lifts the ground from the XLR direct output. Useful for eliminating hum when the direct out is used