ARP Fridge Defend Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільні аксесуари ARP Fridge Defend. ARP Fridge Defend 10 сторінок. V5 + fan control
Також для ARP Fridge Defend: Інструкція користувача (17 сторінок)

Друкувати сторінку
ARP Control v5.x
On/Off
Display
On/Off
Display

CONCLUSION

The ARP Control will protect your fridge by limiting the boiler temperature. The control has a
number of functions that allow the operator to test the operation of the control. Please see the
Installation Guide, Troubleshooting Guide, & Ancillary Graphical User Instructions for
further information on how to install and setup the control if the default programming does not
work for your installation. Further modes of operation are defined in the aforesaid documents.
Please check for updated documents online.
User Manual 04/20/2020 © ARPC L.L.C. All rights reserved.

2.2 No Set-Point Mode

Press and hold the center Display button while
momentarily pressing the On/Off button. Wait until
is displayed to release the Display button. The left and
center dot will flash to tell the operator that the control
is in the
SetUp
This mode is for diagnostics only, the ARP Control will
not turn off the fridge if the boiler over heats when in
the
users only! Please see the Troubleshooting Guide for
further information.

2.3 Auto Tune Mode

Auto Tune is only necessary if the standard 3 ARP
Control settings do not work. 98% of fridges will
work with the standard settings: C-H, PID, C-L control
modes. Please read the Auto Tune section of the
Troubleshooting Guide before running Auto Tune!
To start Auto Tune, hold down both the right SetUp
SetUp
and the center Display buttons. Then momentarily
press the On/Off button. Wait until
release the Display and SetUp buttons.

2.4 SetUp Mode

Hold down the right SetUp button and then
momentarily press the On/Off button, when
displays, release the SetUp button.
AtO
Please see both the Troubleshooting Guide &
Ancillary Graphical User Instructions for further
information concerning the Setup Mode functions and
adjustment for both ARP and the optional fan control.
SP0
mode.
SP0
startup mode. This mode is for advanced
and its value will alternatively display.
5
SP0
At
is displayed to
AtO