Displays2go FRCNRBLK Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень Displays2go FRCNRBLK. Displays2go FRCNRBLK 4 сторінки.

Base Instructions:

1. Insert and tighten bolt into bottom panel base.

3. Insert bolt into Side Toekick & Toekick base panels.

4. Connect Side Toekick & Toekick panels together by

tightening bolt into #58 Cam Lock with screwdriver.

Glass Case Instructions:

1. Insert Side Glass panel into base groove.

2. Attach AGCON2 to the Side Glass panel using 3/4" Trox

Screw and washer from the outside of the panel.

3. Pre-drill hole into base where AGCON2 will be

positioned. Then insert & tighten with #6 x 1/2" Pan Screw.

FRCNRBLK Assembly Instructions

2. Insert #58 Cam Lock into Side Toekick & Toekick base

panels

5. Insert bolts into the now connected Side Toekick &

Toekick panels and connect by tightening bolt into

#58 Cam Lock with screwdriver.

6. Attach Glides onto Toekick panels with hammer.

7. Flip over and sit base on the oor.

4. Insert Back Glass Panel into base groove.

5. Connect Back Glass & Side Glass using AGCON3 &

3/4" Trox Screw.

6. Insert remaining side panel & repeat steps 2-5.