3D Systems ProJet MJP 5600 Оригінальна інструкція з експлуатації - Сторінка 16
Переглянути онлайн або завантажити pdf Оригінальна інструкція з експлуатації для 3D-принтери 3D Systems ProJet MJP 5600. 3D Systems ProJet MJP 5600 18 сторінок.
Друкувати сторінкуContacting 3D Systems
NOTE: Whenever you have a problem or a question it is best to contact your reseller directly first.
If the certified partner cannot help you then there is a Customer Support Hotline you can use. If you
receive an unrecoverable error message, or if you need to contact us for another problem, you may
contact our Customer Support Hotline. Before you call Customer Support with a problem or question,
please make sure that you have the following information:
The serial number of your printer is printed on a label inside the filter door or by accessing the UI and selecting
A brief description of the problem, including the exact error message.
When the problem occurred; for example, when you submitted a job, during the beginning or the end of a print, or after power off recovery, etc.
Customer Support Hotline
Please contact your Customer Support Hotline at one of the following numbers:
US and Canada: 888-598-1438
UK and EMEA: +44 1442 279883
International: +1 803-326-3930
General
ProJet® MJP 5600 service procedures must be performed only by a 3D Systems-certified service
technician unless this guide explicitly states otherwise. If your 3D printer system needs service, contact
3D Systems Technical Support at the following numbers:
In the United States or Canada, call 800-793-3669
In Europe, call +49-6151-357357
You can also contact your local 3D Systems representative.
3D Systems' support portal is located at
For material safety data sheet, go to
http://infocenter.3dsystems.com/materials/professional-printer-materials
https://support.3dsystems.com
Tools
>
Printer
Info.