Disruptive Force Axon Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Фітнес-обладнання Disruptive Force Axon. Disruptive Force Axon 10 сторінок.

2.3 Step 3: Perform Additional Reps

You can perform additional reps by applying pressure to Axon

's pressure-sensing end. The on-

board display will keep track of and indicate the number of reps you have completed since you

last reset Axon

(by cycling the power switch or by pressing and holding the push button).

During each rep, the display will show the applied force in real time. Between reps, the display

will show the rep count and the maximum force you applied during the last rep.

To clear the metrics and start a new set, press and hold the push button until the rep count and

maximum force are both reset to 0.

3. Using Axon

In Guided Mode

In Guided Mode, you define a rep in AxonFit™ and download it to Axon

. Axon

configures

itself to guide you through the rep. Guidance is provided through the on-board display, the strip

of lights, and through AxonFit™.

3.1 Step 1: Connect Axon

to AxonFit™

Make sure Axon

is on and awake.

Launch AxonFit™ on your mobile devie. From the home screen, tap "Connect." AxonFit™

will connect to the closest Axon

it detects and will display the message "HELLO!"

3.2 Step 2: Define a Rep

Once Axon

and AxonFit™ are connected, tap "Define" on AxonFit™. Define a rep using the

sliders. You can set the target force as well as the ramp-up time (the amount of time to go from a

force of 0 to the target force at the beginning of the rep), the hold time (the amount of time to

hold the target force), and the ramp-down time (the amount of time to go from the target force to

0 at the end of the rep).

3.3 Step 3: Send the Rep to Axon

When you are done defining the rep, tap "Send." AxonFit™ will send the defined rep to Axon

and will show a screen with a graphical representation of the rep you defined.

Axon

will now have a solid green light instead of a solid magenta light, and the display will say

"Guided mode."

Disruptive Force LLC

1821 S. Bascom Ave. #246

Campbell, CA 95008