Distech EC-Remote Series Посібник кінцевого користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник кінцевого користувача для Пульт дистанційного керування Distech EC-Remote Series. Distech EC-Remote Series 10 сторінок.
Друкувати сторінку
Lighting Control
Pressing the lighting key
default (x being the number of lighting groups managed).
You can then select the lighting group to be controlled by successively pressing the lighting
key (ALL or 1-x corresponds to the simultaneous selection of all the lighting groups).
Once the lighting group is selected, press
on and off, or to increase and decrease the lighting if your installation uses gradual lighting.
Sunblinds Control
Pressing the sunblind key
1-x by default (x being the number of sunblinds groups managed).
You can then select the sunblinds group to be controlled by successively pressing the
sunblind key
groups).
Once the lighting group is selected, press
selected sunblinds. Depending on the options and the type of sunblinds, you might achieve
the tilt by keeping the tilt key
the rotation.
Temperature Control
Pressing the temperature setpoint key
well as the last set value, unless the user's setting storing has been deactivated by the
building manager.
The temperature setpoint is adjusted in steps and its display depends on your installation.
Numerical: -3 / -2 / -1 / 0 / 1 / 2 / 3
Bar graph:
Press
or
EC-Remote Series
displays the light icon
displays the sunblinds icon
(ALL or 1-x corresponds to the simultaneous selection of all the sunblinds
pressed. Each successive push changes the direction of
to increase or decrease the temperature setpoint of your room.
EC-Remote Remote Control Features
on screen, as well as ALL or 1-x by
or
to turn the selected lights respectively
on screen, as well as ALL or
or
to respectively raise or lower the
displays the temperature icon
on screen, as
7