3D Systems iSense Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Сканер 3D Systems iSense. 3D Systems iSense 14 сторінок. 3d scanner

SCANNER SETTINGS

Modify any scan settings to change the output accordingly.

• Resolution - determines the density of the scan data acquired; higher resolution will yield denser scans, but can slow down the

capture speed.

• Object Size - determines the size of the scan volume; you can specify this according to the size of the object you are scanning.

▪ When

Custom

is selected, you can specify Width, Height, and Depth values.

▪ Prompt on Startup - you can toggle the object selection screen on or off at startup.

• Object Recognition - attempts to automatically identify and highlight the object you are scanning. The scan data will automatically

be cropped to remove everything but the identified object.

• Color - toggles the acquisition of color from the scanner.

• Frame Rate - toggles the on-screen display of frames per second (FPS). The FPS value is inversely proportional to the resolution

setting; the higher the resolution, the lower the FPS. The FPS value is informational only.

• Target Ring - toggles the display of the target ring on your screen; it can be useful for keeping the scanner pointed at the center of

the object being scanned.

Specify any of the following settings during the editing process.

• Color - toggles the display of color on the model.

• Boundaries - toggles highlighting of the boundaries of your scan.

Specify the units of measure for exporting your scan.

3D Systems, Inc.