3D Systems iSense Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Сканер 3D Systems iSense. 3D Systems iSense 14 сторінок. 3d scanner

Друкувати сторінку

• If you select Person, choose either

The

Scan

toolbar provides the following options:

• A - Reset View returns the view to the initial position and orientation.

• B - Home returns to the initial Start screen.

• C - Settings shows the settings for the current scan.

• D - Help displays the

2. Tap

Start Scan

3. Hold the scanner approximately 15 inches away from your subject, and ensure that the image is centered on your screen.

4. Slowly and steadily move the scanner around the subject while viewing the image on the screen.

Best Practice

• Remember to keep the image centered on the screen.

• Multiple passes on the object are allowed. If there are gaps in the scanned data after a single pass, continue scanning to try to fill

the gaps.

• Holding the scanner still over a portion of the object can also fill data gaps.

• Before scanning a small object or one without a lot of distinct features (such as a standard coffee mug), add some items around

the object. This will help the scanner maintain tracking by giving it more to lock on to.

• When scanning a human body, begin by aiming at the torso, and then get a whole body contour scan. Finish by scanning the

head.

5. To pause the scan, tap

Pause

Start

Tap the

icon to resume the scan.

6. When you are satisfied with the scan, tap

EDIT A SCAN

Several tools are available as you edit a scan:

• The toolbar at the top of the screen provides the following options when you are editing the current scan:

▪ A - Undo erases the last change done on the scan.

▪ B - Reset View returns the view to the initial position and orientation.

▪ C - Home returns to the initial Start screen.

▪ D - Settings shows the settings for the current work flow.

▪ E - Help displays the

• Edit tools

▪ If you need to crop your scan, tap the

you want to keep. When you are finished, the app removes the part of the scan that you want to delete. If an error occurred

while cropping, simply tap

Erase

▪ Use the

tool to remove unwanted portions of your scan. Tap the tool, and then drag your finger, using the lasso effect,

over the area that you want to erase; the unwanted portion will be removed. Tap

▪ The

Solidify

tool will make your scan print-ready by filling in all the holes and closing the model to make it solid.

3D Systems, Inc.

Head

Full

Help

menu.

to finish and move to the editing phase.

Help

menu.

Crop

button, and then use your finger to drag a window around the part of the scan that

Undo

and your scan will return to its original state. Tap

Body.

Crop

again to turn off the tool.

Erase

again to turn off the tool.