Acoustic Energy AEGIS CENTRE Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Acoustic Energy AEGIS CENTRE. Acoustic Energy AEGIS CENTRE 4 сторінки.

AEGIS centre manual

5/7/99 8:37 am

Page 3

Connection

Check that your ampliﬁer is switched off before

installing your loudspeaker. Failure to do so may result

in speaker or ampliﬁer damage.

The positive (ribbed) cable from the ampliﬁer positive

(or red) terminal should connect with the positive (red)

terminal on the loudspeaker. Similarly the negative

Power Handling 20 – 175 watt

(smooth) cable should connect the ampliﬁer negative

Impedance 6 ohm

Serial Number

terminal (black) to the negative terminal (black) on the

loudspeaker.

DESIGNED AND ENGINEERED BY

After wiring up: Lower the volume to minimum,

ACOUSTIC ENERGY LIMITED, ENGLAND

MADE IN MALAYSIA

switch on the ampliﬁer, select the signal source and

then raise the volume to the listening level required.

CENTRE

AMPLIFIER