CAME AX3024 Посібник з монтажу - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з монтажу для Відкривач гаражних дверей CAME AX3024. CAME AX3024 16 сторінок. Operator for swing gates
Також для CAME AX3024: Посібник з монтажу (16 сторінок)
Друкувати сторінку
Fully close the gate-leaf, place the mechanical stop against it with the pin attachment and fi x it in place.
Fully open the gate-leaf, place the mechanical stop against it with the pin attachment and fi x it in place.
Connect the gearmotors to the panel as shown in the diagram.
Power
230V a.c.
50/60 Hz
TROUBLESHOOTING
TROUBLES
It neither opens nor closes
The gate opens but does not close
The Flashing light does not work
Opening mechanical
stop
Attachment pin
Delayed
closing
action
POSSIBLE CAUSES
• Power supply missing
• The gearmotor is stuck
• The transmitter's battery is run down
• The transmitter is broken
• The stop button is either stuck or broken
• The opening/closing button or the key-switch selector is stuck
• The photocells are soiled.
• The bulb is burnt
Attachment pin
Closing mechanical stop
Delayed
opening
action
FIXES
• Check main power supply
• Lock the gearmotor
• Replace the batteries
• Call for assistance
• Call for assistance
• Call for assistance
• Clean and check that the
photocells work properly. Otherwise
call for assistance
• Call assistance