CAME AXI SWN20 Посібник з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу для Відкривач гаражних дверей CAME AXI SWN20. CAME AXI SWN20 17 сторінок. Gearmotor for swing gates

Друкувати сторінку

1. Technical Data
2. Installation

Open the gate leaf (the grub screws on the mechanical stops are loose) and ﬁ t the pin

Fasten using the UNI6593 washer Ø 10 and the supplied UNI 5739 M10 X 10 bolt b .

Establishing the limit-switch points

Before establishing the endstop points, you need to: release the gearmotor (see paragraph on manually releasing

it) and remove covers 1 and 2 while carefully following the illustrations.

⚠ DO NOT REMOVE cover 1 without ﬁ rst sliding it.

❷

⚠

❶

into the gate bracket.

❸