CAME F7024N Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Відкривач гаражних дверей CAME F7024N. CAME F7024N 17 сторінок. Operator for swing gates
Також для CAME F7024N: Посібник з монтажу (16 сторінок), Посібник з монтажу (17 сторінок)

Друкувати сторінку

5.9.2 Adjusting the closing-speed brake

Once the opening endstop is adjusted, then you can adjust the closing-speed brake microswitch.

Always with the gearmotor released ...

1) Manually lead the gate leaf to the fully closed position.

2) Turn the contoured cam until the micro switch is released as shown in the diagram.

3) Tighten the screws.

IMPORTANT! The operator is ﬁ tted with a standard speed brake microswitch suitable for gate leaf widths of 1.20m to 2.30 m.

CONTRARILY, IF THE GATE LEAF MEASURES LESS THAN 1.20 m, before proceeding as described above, you must...

A- Remove the 2 adjustment screws;

B- Remove, turn upside down and replace the shaped ring onto the cam (the contour sizes for activating the switch vary);

C- Retighten the securing screws.

<1.20

1.20<2.30 m

Switch

Microswitch

Lower cam

Securing screws for the upper cam

Switch activating contour

Contoured ring

Securing screws for the upper cam