CAME v6000 Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Відкривач гаражних дверей CAME v6000. CAME v6000 17 сторінок. For garage doors
Друкувати сторінку
Examples of use
SECTIONAL DOOR
CANOPY OVERHEAD DOORS, with partially retracting movement.
INSTALLATION
The following illustrations are only examples, given that the space for securing the gearmotor and accessories varies in relation to dimensions. The installation technician is
responsible for choosing the most suitable solution.
Assembling the transmission rail.
Secure the bracket to the transmission rail
screw and nut supplied
.
Position the slide rail as follows:
for sectional doors above the post-spring bracket.
for overhead doors between 10 and 20 mm from the highest point of the leaf sliding curve.
for canopy overhead doors with partially retracting movement, use the V201 arm (see the accompanying technical documentation).
Securing the slide rail
Secure the slide rail to the centre of the door compartment using suitable screws.
Lift up the guide and place it horizontally to measure the distance from the ceiling and choose the type of fastening.
using the
* sectional door
with double rail
SPRING-BALANCED OVERHEAD DOOR,, with fully retracting movement
M6x80
* sectional door
with single rail
M6
V201