CAME AGT A200K Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Домофонна система CAME AGT A200K. CAME AGT A200K 12 сторінок.

Wall-mounted installation

Fix the two hole covers to the base

Attach the recessed box (with 3 modules

or round Ø 65 mm) ﬂ ush with the wall

and at a suitable height; ﬁ x the base to

the wall using the screws and expansion

plugs provided

In systems where the Larsen eff ect

might occur, the microphone can be

mounted remotely

To remove the microphone from its

housing, pry it off its base using a

small screwdriver, taking care not to

damage the cabling

Before inserting the microphone in the

bottom part of the back-box, use pliers

to remove the part that is highlighted

Insert the audio unit near the top of the

base

Fit the microcontact (bottom right) into

the correct housing

. The front plate

is equipped with a common call for

the microcontacts, to be used when

other buttons are to be installed

(maximum of 4)

Insert the lighting unit in the relevant

housing

Make the connections and secure the

cables using the cable holder

The cable holder must be located near

to the audio unit.