Acoustic Research AWSBT1 Посібник з монтажу та експлуатації - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Спікери Acoustic Research AWSBT1. Acoustic Research AWSBT1 4 сторінки. Portable wireless speaker
Також для Acoustic Research AWSBT1: Посібник з монтажу та експлуатації (2 сторінок)
Друкувати сторінку
Setting Up Bluetooth Wireless
Streaming Audio With Bluetooth
Once you've paired and connected your device with the speaker, you can control music
playback from the palm of your hand. Select your music, stop it, change songs and playlists, all
right from your device's screen.
To adjust volume: Press the Vol +/– buttons on top of the speaker.
To disconnect from the speaker: Either turn Bluetooth off on your device or choose
"Disconnect" from the list of options in your device's Bluetooth settings.
To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the
speaker to fi nd and connect to your device. If the speaker still hasn't found your device (which
may happen if, for instance, another device has been connected after yours) make sure the
speaker isn't connected to another device currently. Then select the AWSBT1 from the list of
Bluetooth connections available in your device's Bluetooth menu to connect to it or
Fast Re-connect with press and release of the Pair button.
Using the Auxiliary Input
Connecting to an Audio Source
Connecting to an MP3 player, CD player, or computer
1. Open the storage compartment on the back panel to show the
attached 3.5mm cable.
2. Connect the cable to the headphone output on your MP3 player
or CD player (or the audio output jack on your computer) and start
playback.
3. Make sure the speaker is on. Then press the
the speaker. The light on the front of the speaker will change to
solid green. You should hear sound coming from the speaker now.
To switch back to the speaker's Bluetooth connection, press the
button again.
Note: You may fi t your connected device, such as iPhone or iPod
touch, inside the closed compartment while the speaker is playing.
Warning:
This product is designed to work with line level outputs
or headphone outputs only.
outputs as it will permanently damage the speaker.
Turning the Speaker Off
1. Press and hold the Power button
2. Confi rm that the speaker is off by verifying that the indicator light on the speaker's front
panel is no longer illuminated.
Note: When you turn off the speaker in Bluetooth mode, you will hear 4 beeps to indicate
Bluetooth mode is turned off.
button on the top of
DO NOT
connect it directly to speaker
on the top of the speaker to turn the speaker off.
Troubleshooting
The following troubleshooting guide takes you through some of the more common problems
associated with the installation and/or operation of a wireless system. If the problem persists,
please call toll-free at 1-800-732-6866 or visit www.acoustic-research.com.
Issue:
Cause and solution:
No sound
• Check that the AC power adapter is fully inserted into the wall outlet and the power
cord from the AC adapter is fi rmly connected to the speaker's power input jack.
or
• If you're using batteries for the speaker, check that they are fresh and inserted with
correct polarity (+, –). Make sure the batteries are fresh and replace if necessary.
• Confi rm that the speaker is turned on.
• Check that the audio source component (stereo, MP3 player, etc.) is turned on and
transmitting sound as it normally should.
• Make sure the volume on your audio source is turned up.
• Check that the speaker volume is turned up.
• Move the Bluetooth device and the speaker closer together. The Bluetooth wireless
technology generally can operate within a range of 35 feet. However results may
vary based on other factors such as room layout, wall material, weather conditions,
etc.
• Make sure you have switched to the speaker's Bluetooth connection when streaming
audio with Bluetooth.
• Make sure you entered the correct passkey when pairing your device.
Cannot pair
• Make sure the Bluetooth capability of your device is turned on and discoverable.
the speaker
• Move the Bluetooth device and the speaker closer together. The Bluetooth wireless
with your
technology generally can operate within a range of 35 feet. However results may
Bluetooth
vary based on other factors such as room layout, wall material, weather conditions,
device
etc.
• Make sure your device supports audio transfer.
• Turn off all other nearby Bluetooth devices or disbale their Bluetooth functionality.
• Bluetooth Reset: Press and Hold the Pair Button for 12 seconds. (Fast double beep on
reset). This resets the Bluetooth module in the speaker.
Speci cations
Speaker
• Bluetooth® wireless technology: Bluetooth v2.1 + A2DP profi le
• 2-way acoustic design: 3" driver, 1.5" tweeter
• Audio output power: 5W (Maximum)
• Audio line-in
• Distortion : 0.5%
• S/N Ratio : 65dB (typical)
• Operation distance : Up to 10 meters (open area)
• Frequency response: 20Hz - 20kHz
• Operates using supplied AC adapter or six (6) AA batteries (not included)
*Maximum range; results may vary according to environment.
FCC
This e
the F
instal
accor
that i
televi
the in
•
•
•
•
FCC R
opera
RF
This e
trans
locate
anten
Indu
This d
devic
undes
This c
IC Ra
enviro
The B
by Au
owne
1
Audio
that
or wo
(at th
the t
deliv
prepa
This
State
costs
The w
been
mois
leavi
THE
REPL
PURC
This
ANY
LIMIT
INCL
OF O
INCID
any l
Some
limita
This
to sta
U.S.A
CAN
3A5
Trade