Alto ELVIS15S Посібник користувача - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Alto ELVIS15S. Alto ELVIS15S 7 сторінок. Elvis series speaker cabinet
Також для Alto ELVIS15S: Посібник користувача (14 сторінок)
Друкувати сторінку
-. For Passive Subwoofer & Satellite Speakers
1). Connect one side of speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier and the other
side to the Input socket of your subwoofer, with the second speaker cable connect the Output of the subwoofer to the
Input of satellite.
2). Complete other connections as illustrated.
3). Turn on your mixer first, then the stereo power amplifier.
4). Turn up the volume controls of your amplifier to about 70%.
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output
level.
6). After using, turn off your stereo power amplifier first, then the mixer.
QUICK START
ELVIS Passive Subwoofer & Satellite Speakers
Speaker Cable
pole
Mount
Speaker Cable
Stereo
Power Amplifier
Main Mix
Mixer
Speaker Cable
pole
Mount
Speaker Cable
Left
Right
Main Mix
Output
Output
4
-. ACTIVE SUBWOOFER Speaker for ELVIS12 SA / ELVIS15 SA
(1) Bi-polar main power switch.
(2) Input AC power socket with main fuse.
(3) Ground Swicth.
(4) POWER, blue LED, indicate ON status.
(5) SIGN / COMP, signal/compressor, green/red LED
(6) LEFT signal output on XLR or Jack connector for active satellite, under electronic crossover at 125Hz.
(7) RIGHT on XLR connector for active satellite, under electronic crossover at 125Hz.
(8) VOLUME main power amplifier control.
(9) RIGHT, input signal on XLR connector.
(10) LEFT/MONO, input signal on COMBO connector.
MODEL
AC INPUT: 230V~ 50Hz
Use only with a 250V fuse
(2)
LINK
(6)
LEFT/
MONO
OUT
RIGHT
(7)
VOLUME
(8)
-
+4dBu
LEFT/
MONO
(10)
IN
RIGHT
(9)
SERIAL
GND
(3)
ON
SIGN
COMP
(5)
POWER
(4)
OFF
(1)
9