Alto TX10 Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери Alto TX10. Alto TX10 4 сторінки. 10" active loudspeaker

Features

Rear Panel

6 7

AC Input: Use the included power cable to

connect this input to a power outlet. Make

sure the Power Switch is set to off when

connecting or disconnecting the cable.

Power Switch: Use this switch to power the

loudspeaker on or off. Make sure the

Volume knob is set to its minimum

(counterclockwise) position before turning it

on.

Power LED: This LED lights up when the

loudspeaker is on.

Cooling Vent: Keep the area in front of this

vent clear from obstructions. The fan behind

the vent cools the amplifier, preventing

overheating.

Volume: Turn this knob to adjust the

loudspeaker's volume.

Input: Use a standard XLR cable (not

included) to connect your audio source to

this input. Make sure to set the Volume

knob to the correct position.

Link Output: Use a standard XLR cable (not

included) to connect this output to the input

of another loudspeaker (i.e., another TX

loudspeaker).

Signal Limit LED: This LED lights up when

the

audio

signal

loudspeaker is "clipping" or distorting. If this

LED

illuminates

reduce the volume of your audio source.

being

sent

the

frequently

steadily,