DIVERSIFIED Large Vent 44x12 Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Вентилятор DIVERSIFIED Large Vent 44x12. DIVERSIFIED Large Vent 44x12 13 сторінок. Vent system
Друкувати сторінку
The Following two Steps are for Vents with Pre-attached "P" Seals
5. Install Top seal along Top Edge of opening
Using standard flat head roofing
nails (not provided) install the Top
"P" seal along the top of the vent
window opening. Install a nail
every 6 inches. (The Top "P" seal
will be provided separately)
5a. Secure Vent to Wall
Hold the Vent in position where the
vertical side Seals on both sides of
the Vent touch the bottom of the
Top "P" Seal at both ends.
While in this position install 4 each
Stainless Steel Screws (provided)
into the two Hinges. It is critical
that the Top seal and side seals
meet to provide a proper seal when
the Vent is closed and the seals
compress together.
Ensure the white Hinge Spacer is in
place while installing the screws
through each Hinge.
Hinge Spacer
Top Seal
Side Seal