Alto DYNAMATE Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису Alto DYNAMATE. Alto DYNAMATE 19 сторінок.

Device Initialisation, Preset Selection & Bypass

During the device initialisation the display digits will blink and, after a brief time, will show the number of the last loaded

preset. You can then scroll through the 64 pre-loaded presets and select an alternative program.

During preset scrolling, the display blinks while showing the ID numbers of the various presets. After a few seconds, if a

new selection is not confirmed, the display will stop blinking and return to show the number of the currently active preset

ID.

Pressing the

ENTER

key for a few seconds switches the system into BYPASS mode (the display shows a blinking 'bP').

To exit this status, simply press the

Preset ID "00" also represents a BYPASS.

DOWN

key.

LTO