Alto Professional TrueMix 600 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Музичний мікшер Alto Professional TrueMix 600. Alto Professional TrueMix 600 20 сторінок.
Друкувати сторінку
(3.0) FEATURES
6.
Aux Send Knob: Turn this knob to adjust the signal
volume sent from the channel input to the Aux Send
Output. This knob also adjusts the signal volume sent
back to the Bluetooth channel during use on a phone
call with a connected device. See the section
Operation > Connecting a Bluetooth Device
more details.
7.
Channel Pan: Turn this knob to adjust the (mono)
channel's
8.
Peak LED: This LED will flash when the signal is
clipping. If this happens, decrease the level on the
Gain knob or Channel Volume knob.
9.
Channel Volume: Turn this knob to adjust the level of
the channel's output signal.
10. Control Room Outputs: Use 1/4" (6.35 mm) TRS
cables to connect these outputs to your monitor or
amplifier system. The level of these outputs is
controlled by the Control Room Headphone Output
knob.
11.
Aux Return Inputs: Connect the outputs of an external device to these inputs
with standard 1/4" (6.35 mm) cables. Aux Return is commonly used for
outboard effects devices but can also be used like an extra input channel for
synthesizers, drum machines, etc. If your source is mono, plug it into the left
input and it will be heard on both the left and right sides. The level of these
inputs is controlled by the Aux Return volume knob.
12. Aux Send Output: Use a 1/4" (6.35 mm) TRS cable to connect the Aux Send
output to the input of an external amplifier or active monitor to create a custom
monitor mix for onstage musicians. You can adjust the signal volume for each
channel in this mix using the Aux Send knobs.
13. Aux Return Volume: Turn this knob to adjust the level of the signal sent from
the Aux Return Inputs to the Main Output.
14. Main Outputs: Use 1/4" (6.35 mm) TRS cables to connect these outputs to a
speaker or amplifier system. The level of these outputs is controlled by the Main
Out knob.
15. Control Room/Headphone Output (1): Connect a pair of stereo headphones to
this 1/4" (6.35 mm) TRS output to monitor your Main Output or 2TK/USB
signals.
16. Main Out/Headphone Output (2): Connect a pair of stereo headphones to this
1/4" (6.35 mm) TRS output to monitor your Main Output signal.
17.
Headphone Source: Press this button to switch the Headphone Output 1
source between the Main Out and 2TK/USB. Headphone Output 2 monitors the
Main Output only and is unaffected by this button.
18. Headphone/Control Room Volume Controls: Turn these knobs to adjust the
volume of the corresponding Headphone outputs directly above. The volume
knob for Headphone Output 1 also controls the Control Room Output volume.
19. 2TK/USB Inputs: You may connect these inputs to the outputs of an external
sound source using a standard stereo RCA cable (sold separately). You can also
send this channel to the headphone mix (using the Headphone Source button)
and/or the main mix (using the 2TK/USB To Main Out button).
Left-Right position in the stereo field.
(4.2)
for
11