Balmar SG200 Посібник з монтажу та експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Монітор Balmar SG200. Balmar SG200 19 сторінок. Battery monitor
Друкувати сторінку
Table of Contents
Table of Contents
Real-Time Data
Faults
Safety Precautions
Safety Precautions
1. Take time to read the manual. Equipment damage and possible injuries
3
may result from an incomplete understanding of the installation and
4
operation of the SG200 Battery Monitor. If you are unfamiliar with marine
electrical systems, consult with a qualified marine electrician.
6
2. Always disconnect your battery banks and ensure that switches are "OFF"
6
prior to installing the SmartShunt. No current should be flowing when the
8
SmartShunt is installed!
10
3. Remove all metal jewelry while working on your electrical system, to avoid
12
any completing a circuit with these items, especially bracelets, rings or
13
handing necklaces.
13
4. Wear ANSI-approved safety eye-wear and protective gear.
14
5. DO NOT attempt to modify the SmartShunt or Display. Modifications could
15
result in damage to your charging system and will void your warranty.
16
6. DO NOT attempt installation while using alcohol or medication that could
impair your judgment or reaction time.
17
7. Always use the right tool for the job. Improper tool use may damage the
17
shunt, gauge or your vessel, and could result in personal injury.
18
8. If installing in an engine compartment with a gasoline engine, proper
19
ventilation practices must be used to ensure no explosive gases exist
19
before installation.
20
9. If installing a compartment with batteries, the compartment must be
21
properly ventilated to ensure no build-up of explosive gases prior to
23
installation.
23
25
26
27
28
29
29
29
30
30
30
31
31
32
34
3