Camera Corps Q3 Посібник з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з експлуатації для IP-камера Camera Corps Q3. Camera Corps Q3 18 сторінок. Robotic camera system

General

The Q3 robotic camera system is based around four main

components. The main Q3 head, the interface unit, the

joystick control and the RCP.

The joystick control and the RCP have their own operation

manuals so will not be described in detail here, except

where they have specific functions applicable to Q3.

Q3 has some major improvements over its Q-Ball

predecessor. These include an improved camera block

providing higher sensitivity, resolution and features such as

genlock. Also, the new system has been designed in such a

way that improved camera modules may be fitted as new

ones become available. This gives the new model a 'future

proof' concept.

Many more options are now provided for control of the head. These include standard

Camera Corps audio data, RS232, RS422 and IP all at varying baud rates.

A continuous data output is provided showing the pan, tilt, zoom and focus positions. This

uses a standard D1 or 'raw' format although other formats can be provided on request.

An optional fiber interface can be added to the interface box providing data control, genlock

and HD Video signals using two single mode fibers.

A PAL/NTSC output is provided at the same time as the HD output for most selected

camera formats.

Multiple HD formats are available, detailed later in this manual.

The control software protocol for Q3 is readily available for third party use. Please contact

Camera Corps Ltd. for full details and a control protocol description document.

Although Q3 has a camera block which uses the latest technology and sensor please

remember that it is a single 1/3" chip and as such will not have the same high sensitivity as

a large camera with 3 x 2/3" chips!

The Q3 head unit is sealed against moisture and dirt ingress. However, it should not

be installed long term in an outdoor location without additional rain protection.

The mounting is by means of a standard ¼" UNC thread, or special mount adapter.

Although Q3 does not have a tilt slipring it can still be mounted either upright or inverted

without any mechanical changes to the ball itself.

Operation Manual V3.1

Q3 – Operation Manual

Page 2

April 2014