Balogh ERCP 81 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Трансивер Balogh ERCP 81. Balogh ERCP 81 8 сторінок.

4 MAINTENANCE

N/A

Symptom: absence of message acknowledgement outside radio dialogue.

Troubleshooting:

• Make sure the power supplied to the ERCP 81 is within the specified limits,

• Check that the interface's UART is working properly by loop connection of the serial link lines,

• Check the ERCP 81 – interface link: quality of contacts, continuity of wires and protection, etc.

If it turns out that the ERCP 81 is not working, replace it.

Symptom: no valid message in radio dialogue despite proper exchange conditions (see datasheet)

Replace the ERCP 81.

1) Remove the ERCP 81:

• Switch off the power supply,

• Disconnect and unscrew the ERCP 81.

2) Replace the ERCP 81:

• Screw the ERCP 81 in,

• Remove the protective plug and connect the ERCP 81,

• Power up.

BALOGH SA,

189 rue d'Aubervilliers C.P. 97 75886 PARIS Cedex 18 FRANCE

sous réserve de modification - Réf : M-ERCP 81-1.0-GB

ERCP 81

8 / 8