Cameron CVC-1080 Інструкція з експлуатації - Сторінка 17

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Пилосос Cameron CVC-1080. Cameron CVC-1080 19 сторінок.

The exhaust ﬁlter (11) is located at the

back of the product. To remove, press the

clip and pull the ﬁlter cover away from the

product [K]. Remove the ﬁlter.

The exhaust ﬁlter is non-washable. Clean

by shaking over a dustbin To remove ﬁne

dust use the crevice tool brush to gently

clean between the pleats.

It is recommended that the exhaust ﬁlter is replaced every 6 months

or sooner if it becomes damaged.

IMPORTANT

•

All ﬁlters should be checked regularly for signs of damage, prefer-

ably after each cleaning task, The ﬁlters must be replaced imme-

diately if they become damaged.

•

Always disconnect the cleaner from the mains when checking ﬁl-

ters.

•

Always make sure all ﬁlters are ﬁtted before use. Failure to do so

may result in damage to your product.

When ﬁnished you can store the tubes

and accessories by locating the tube stor-

age clip into the slot on the bottom of the

cleaner as shown [L].

Your cleaner is manufactured to withstand normal day-to-day use,

but an occasional wipe over with a damp cloth will help maintain its

good looks. Abrasive cleaners should not be used.

CLEANING THE EXHAUST FILTER