3DTV STEREODRIVER X Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для 3D окуляри 3DTV STEREODRIVER X. 3DTV STEREODRIVER X 4 сторінки.

3DTV Corp STEREODRIVER Model X

The Model X is meant to be used with wired LCD shutter glasses and

50hz (PAL, SECAM) or 60hz (NTSC) 3D field sequential (i.e., right/left

alternating) video and tube type (CRT) TV's. For higher frequency TV

or PC see our other products.

Connect a standard RCA audio or video cord from the composite VIDEO

OUT (a yellow RCA jack) of your VCR, VCD or DVD player, STB (set top

box--i.e., cable or satellite) to the provided RCA splitter and plug the

RCA from your TV video in into the RCA splitter. Plug the splitter into

the yellow RCA jack in the back of the Model X.

If using wired glasses, plug the stereo jack of the wired LCD shutter

glasses into the mini jack on the back of the Model. Up to 6 wired

glasses can be plugged in using standard stereo headphone splitter

plugs.

First time the unit is used you need to connect the 9V battery by

removing the battery cover in the back, connecting both leads, and

replacing the cover.

Turn on the power by pressing the left button(red light) and turn off

when finished viewing 3D. When you play the 3D program the red

light on the right side should be a steady red—if it blinks you must

check all connections. If the image is 3D (one image in each eye) but

looks strange, press the right side MODE button to reverse the eyes.

If you are using wired glasses and wish to sit further from the TV, you

may use a standard stereo headphone extension cord between the

StereoDriver and the glasses or RCA extension cords to the video

source and TV.

For European User's

If there is no composite video out from your video source, but only a

Euro AV (SCART) connector then use a SCART to RCA breakout