esera automation Multisensor Pro 11150 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари esera automation Multisensor Pro 11150. esera automation Multisensor Pro 11150 5 сторінок. 1-wire sensor for temperature and air humidity w/auto-e-connect
Друкувати сторінку
Art. No. 11150
Calculations
Temperature
Standard output according to DS2438 module
Operating voltage
Standard output according to DS2438 module
Humidity
To obtain the rel. humidity in percent, multiply the output value (Vas) by a factor of 10. 0.1V corresponds to
1% relative humidity.
8
Data output 1-Wire Controller / 1-Wire Gateway
For the 1-Wire Multisensor Pro, the following measured values are calculated and output by the 1-Wire
Controller / 1-Wire Gateway. The dew-point calculation is a function of the 1-Wire Controller /
1-wire gateway.
Data output:
1_EVT|12:27:40
1_OWD1_1|2008
1_OWD1_2|511
1_OWD1_3|470
1_OWD1_4|1200
Further information for options and commands can be found in the latest available documentation for
1–Wire Controller / 1–Wire Gateway.
9
Integration in IP-Symcon / ESERA-Station
Through our website we provide ESERA IP-Symcon software-modules to import the 1-Wire Multisensor in
IP-Symcon via 1-Wire Controller / 1-Wire Gateway. Therefore, no scripts are necessary.
Further details can be found here:
integration/.
For a conventional connection by a 1-wire bus coupler, the sensor values are to be calculated according to
the given formulas.
10
Integration in Loxone
At our webshop we provide a sample project on how to import the 1-Wire Multisensor by 1-Wire Controller
1/1-Wire Gateway. Further details can be found here:
https://www.esera.de/kompatible-steuerungen-zentralen/loxone-integration/demo-1-wire-controller-1-loxone-
integration/
11
Integration in FHEM
For integration into the open source automation software FHEM, we provide a software module to import in
the 1-Wire Multisensor by 1-Wire controller / 1-Wire gateway. Therefore, no scripts are necessary.
Further details can be found here:
12
Measurement accuracy
The sensor elements inside the 1-Wire Multisensor Pro are calibrated. Please note that the measuring
accuracy may possibly decrease towards the measuring range limits as well as at very high/low operating
temperatures.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
=> controller no._module no._data record|temperature (°C) example: 20,08 °C
=> controller no._module no._data record |voltage VCC (V)
=> controller no._module no._data record |humidity (rF) example 47,0%
=> controller no._module no._data record |dew-point (°C) example: 12,00 °C
https://www.esera.de/kompatible-steuerungen-zentralen/ip-symcon-
https://www.esera.de/kompatible-steuerungen-zentralen/fhem-integration/
11150 V2.0 R1.0 Manual
Page 3 of 5