esera automation 11216 Посібник користувача
Переглянути онлайн або завантажити pdf Посібник користувача для Системи вводу/виводу esera automation 11216. esera automation 11216 7 сторінок. 8-fold digital input for 1-wire bus
Також для esera automation 11216: Посібник користувача (9 сторінок)
Друкувати сторінкуArt. No. 11216
8-Fold Digital Input Module for 1-Wire Bus
8 inputs for 10-30V direct power voltage signals,
e. g. for switches, reed contacts or other digital
sensors
LEDs for input state,
input status and supply voltage
Inputs can be activated via manual control
DIN rail housing for control cabinet installation
Connection via screw terminals
Easy software-based integration
Standard 1-Wire Interface DS2408
Housing colour Green
1
Introduction
Before you start assembling the 8-Fold Digital Input Module and put the device into operation, please read this
assembly and operating instructions carefully to the end, especially the section referring to the safety notes.
2
Product description
With the 8-fold Digital Input Module the status of 8 switches, reed contacts or all kinds of digital sensors can be
queried. The status of the switch inputs is displayed via the LED indicators on the front panel. When the input
voltage is applied, the respective LED display lights up.
To additionally protect the inputs from interference, the module has filters with a delay of only 30ms.
Each input can be set manually by push button for test purposes, maintenance or development.
For testing purposes, maintenance or development each input can be set manually with a button.
Inputs are insulated from the 1-Wire network by optocouplers. Thus, it is possible to use extra long connection
cables among the module and the sensors without exerting a perturbing influence on the 1-Wire Bus.
Additionally, the insulation between the switch inputs and the 1-Wire Network ensures an increased safety.
Only a 12 V power supply is required for the operation of this module. We recommend the use of one of our
1–Wire Hub Modules.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
User Guide
11216 V4.0 R1.0 Manual
Page 1 of 7