ClearCube Thin Client I8520 Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Робочий стіл ClearCube Thin Client I8520. ClearCube Thin Client I8520 2 сторінки.

Друкувати сторінку
I8520 Thin Client
Power Button
Disk
Activity
NIC
Activity
Audio In
Audio Out
Speaker
10/100/1000
Mbps Ethernet
COM Port
ClearCube Technology, Inc.
Quick Start Guide
The ClearCube
computing devices, such as ClearCube blades or other computing
resources. The I8520 package contains: I8520 thin client, an I8520
pedestal, this Quick Start Guide, and a power cord appropriate for your
country.
Smart Card
This guide describes how to set up the I8520 thin client. See
Reader
www.clearcube.com/support/
(Optional Feature)
• I/Port User Guide describes how to use ClearCube I/Ports, clients, and
thin clients.
• ClearCube PCoE
configure, and use ClearCube PC-over-Ethernet
connection software. (PCoE is not required to use an I8520 thin client.)
• ClearCube Sentral
ClearCube Sentral to manage thin clients, chassis, and related devices;
perform connection brokering; and more. (Sentral is not required to use
an I8520 thin client.)
Safety and Precautions
USB 2.0
Ports
Prevent ESD (electrostatic discharge) damage to smart card readers by
Pedestal
perform ESD prevention steps before using the card reader.
•
•
•
Setting up Your I8520 Thin Client
Four
1.
USB 2.0
Ports
2.
DVI-I
3.
VGA
4.
AC Power In
3700 W Parmer Lane
Austin, Texas 78727
®
I8520 thin client enables users to access remote
for the following additional information:
™
Administrator's Guide describes how to install,
™
Administrator's Guide describes how to use
always discharging your body and smart card before using a
reader (for example, by touching a grounded, unpainted, metal
object). ESD can vary depending on many environmental
conditions, including clothing that users wear and how they
handle smart cards. ESD damage can potentially cause
unsupported card reader behavior including failure. Always
Do not install the thin client in areas where it can become wet or be
exposed to water.
Only use the power cord shipped with the thin client.
Ensure there is four inches of space surrounding the thin client.
Inadequate ventilation can damage the device.
Carefully unpack the I8520 and components. Ensure that you have
the following items:
• Power cord (included with the thin client)
• USB mouse to connect to the I8520
• USB keyboard to connect to the I8520
• VGA or DVI-I monitor to connect to the I8520
Place the I8520 on a desktop. You can mount the thin client vertically
(inserted in the included pedestal) or horizontally.
Connect a USB keyboard and mouse to the thin client. As shown in
the adjacent figures, USB ports are located on the front and rear of
the I8520.
Establish a network connection between the thin client and a remote
computing device by connecting an Ethernet cable to the Ethernet
port on the rear of the thin client and to the Ethernet port on the
remote device. If you are using ClearCube PCoE remote connection
software, see PCoE Administrator's Guide, included with PCoE
software, for information about installing, configuring, and using
PCoE.
—Continued on Reverse—
(512) 652-3500
™
(PCoE) remote
www.clearcube.com