3DUpFitters CR-10 S5 Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Стелажі та підставки 3DUpFitters CR-10 S5. 3DUpFitters CR-10 S5 15 сторінок. Enclosure kit

Друкувати сторінку

Assemble Panels

The S5 side panels are made from thicker 1/4" acrylic to provide more structural rigidity. Do not

try to bend the 1/4" acrylic! The S4 version has 1/8" acrylic or 1/4" wood side panels.

1. Attach The Front Door Frame Corners 

Each of the corners on the enclosure will be held together by the connectors pictured below. There are

only two versions L and R, which can be identiﬁed by the letters stamped on the inside. The opposite

connectors are identical, i.e. Bottom Right is the same as Top Left. In all cases the surface of the

connector with the cutout pattern faces front or back.

Top Left

Bottom Left

The front door is designed so that the latches

are on the left. Attach the corner connectors on

the back side of the door frame using the

provided cap head 14mm screws. See the

photos below. The top of the connector should

be ﬂush with the top of the acrylic.

Top Right

Bottom Right