3DVIA Racing 3DV-X1 Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Іграшкова машинка на колесах 3DVIA Racing 3DV-X1. 3DVIA Racing 3DV-X1 5 сторінок.
Друкувати сторінку3DV-X1
SAFETY PRECAUTIONS
When the safety precautions are followed,
the 3DV-X1 will provide years of
enjoyment.
Use care and good sense at all times when
operating this radio controlled buggy.
Failure to use this vehicle in a safe,
sensible manner can result in injury or
damage to property. You and you alone
must insure that the instructions are
carefully followed and all safety precautions
are obeyed.
Do not operate the 3DV-X1 near
people. Spectators should be behind
the driver or at a safe distance away
from the vehicle.
Make sure to read the instructions with
the battery and charger before
charging.
Do not cover the air intake holes on
the charger during charging. This may
cause the charger to overheat.
Do not allow the electronic speed
control (ESC) or radio equipment to
come into contact with moisture. Water
can cause the electronics to short out
and can cause permanent damage.
HELPFUL HINTS
Avoid working over a deep pile carpet.
If you drop a small part or screw, it
may be difficult to find.
Place a mat or towel over your work
area. This will prevent parts from
rolling off and will protect the work
surface.
Avoid running the buggy in cold
weather. The plastic and metal parts
can become brittle at low
temperatures. In addition, grease and
oil become thick, causing premature
wear and poor performance.
Test fit all parts before attaching them
permanently.
www.3DMOJO.com
WARRANTY
3DVIA Racing® guarantees this kit to
be free from defects in both material
and workmanship at the date of
purchase. 3DVIA Racing will warranty
this kit for 90 days after the purchase
date.
3DVIA Racing will repair or replace, at
no charge, the incorrectly made part.
Make sure you save the receipt or
invoice you were given when you
bought your model! It is your proof of
purchase and we must see it before
we can honor the warranty.
3DVIA Racing reserves the right to
change or modify this warranty without
notice.
In that 3DVIA Racing has no control
over the final user assembly or
material used for final user assembly,
no liability shall be assumed nor
accepted for any damage resulting
from the use by the user of the final
user-assembled product. By the act of
using the user-assembled product, the
user accepts all resulting liability.
RETURNS
To return your 3DV-X1 for repairs covered
under warranty you should send your
buggy to:
3DVIA Racing
300 Baker Avenue
Concord, MA 01742
+1-800-693-9000 US and Canada
www.3DMOJO.com
OPERATI ON MANUAL
PARTS GUARANTEE
We have engineered the 3DV-X1 to take
the rough and tumble abuse that makes
R/C fun. We are so confident of the quality
and durability of the Stress-Tech plastic
parts that we will replace any Stress-Tech
plastic part you break during the first 12
months you own the buggy. Just send in
the part to us and we will send you a FREE
replacement. Please see the 3DV-X1 parts
list for the items covered under the Stress-
Tech guarantee.
To receive your free replacement part
please send the following to the 3DVIA
Racing address listed under the warranty
on the left.
1.
The broken part must be included.
2.
The part number and description
of the broken part.
3.
Copy of your dated invoice or
purchase receipt.
4.
Your name, phone number and
shipping address.
REPAIR SERVICE
Repair service is available anytime.
After the 90 day warranty, you can still
have your 3DV-X1 repaired for a small
charge. To speed up the repair process,
please follow the instructions listed below.
1.
Under most circumstances return the
ENTIRE vehicle. The exception would
be sending in a Stress-Tech part. See
the instruction under the Stress-Tech
Guarantee.
2.
Make sure the transmitter is turned off,
and all of the batteries are removed.
3.
Send written instructions
1