Acoustic Signature TA-1000 Інструкція з експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обладнання для запису Acoustic Signature TA-1000. Acoustic Signature TA-1000 8 сторінок.
Друкувати сторінку
1. Preparing the arm mounting board
To mount the TA 1000 tonearm your turntable need´s to have a
23mm thru hole combined with 3 M3 thread´s around it at the
Radius of 20.5mm (see drawing).
Ensure that the thread´s are positioned as showed in the drawing.
The distance of the center hole to the middle of the platter must be:
222mm for the 9 inch version
237,80mm for the 10 inch version
295,60mm for the 12 inch version
2. Fitting the arm
Take the provided 3 screws (marked blue) and put them into the
marked 3 holes. Use the provided allen key to tighten the screw´s.
To get easier access to the holes it might be helpful to turn the
armtube so the holes are free.
3. Antiskating
1
Take out the Antiskating weight with the string (1) and put the Alu
piece into the tube and pass the string with his loop over the
antiskate lever.
2