ESI ESRTP4+ Інструкція користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція користувача для Терморегулятор ESI ESRTP4+. ESI ESRTP4+ 11 сторінок. Programmable room thermostat
Також для ESI ESRTP4+: Інструкція з монтажу Посібник з монтажу (11 сторінок)

Друкувати сторінку

To Operate the Copy Function

1. Switch the slider to PROG and press the

Button.

2. Press the C button to enter the COPY mode.

3. The A button chooses the day you want to copy from and

the +/- buttons choose the day you want to copy to.

4. Press the C button to confirm. The screen will show SEr

(to show the Copy function is set).

Battery Replacement

4.3

When the low battery symbol flashes in the LCD display, the

batteries need to be replaced as soon as possible. The battery

compartment is located on the front of the thermostat, under

the fascia cover. Remove the old batteries and insert new

ones. All settings including time are maintained.

N.B. If the display ever goes blank during normal operation,

the batteries need to be replaced with high quality

alkaline cells. The date, time and factory pre-set heating

times will be retained (assuming the back up battery has

not failed).

Resetting the Unit

4.4

Hold the Next

button and press the reset button to restore

to factory default settings.

Home

WARNING: Interference with sealed parts renders the

guarantee void.

In the interests of continuous product improvement we reserve

the right to alter designs, specifications and materials without

prior notice and cannot accept liability for errors.