ESI CLIMB2-SLV Інструкція з експлуатації - Сторінка 9
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Стелажі та підставки ESI CLIMB2-SLV. ESI CLIMB2-SLV 10 сторінок. Dual monitor sit/stand workstation
Друкувати сторінку
ADJUSTMENT
CLIMB2
If Necessary, Adjust for Load Weight
This adjustment can be used to maximize ease of operation. When operating this product, the main
assembly arm should move easily to any position and hold that position.
• If the arm is difficult to raise or lowers too easily, increase the load adjustment (+).
• If the arm is difficult to lower or raises too easily, decrease the load adjustment (–).
• Use the 6mm Allen key to turn the adjusting screw — counterclockwise to increase load, clockwise to
decrease it.
• Test operation and re-adjust as necessary.
CAUTION: Do not over-tension the MAX (+) adjustment.
6mm Allen
Wrench
–
+
8