ClearMirror ClearLite Series Інструкція з монтажу Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень ClearMirror ClearLite Series. ClearMirror ClearLite Series 6 сторінок. Led back-lit and side-lit fog-free vanity mirrors
Друкувати сторінкуIMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before installing or using this heater.
When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the following:
•
Do not operate any heater after it malfunctions. Disconnect power at service panel and
have heater inspected by a reputable electrician before reusing.
•
Do not use outdoors.
•
To disconnect heater, turn bath switch to off, and turn off power to heater circuit at main
disconnect panel (or operate internal disconnect switch if provided).
•
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this
may cause an electric shock or fire, or damage the heater.
•
To prevent a possible fire, do not block air intakes or exhaust in any manner.
•
Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
OPERATING
•
The ClearLite assembly must be properly installed before it is used.
•
The ClearLite is to be installed over a bathroom vanity sink with wiring fed from behind the
full, wall-mounted assembly.
•
Be certain that the controls are operational per the instructions above in that the bathroom
light, ceiling fan or alternate switch power on and power off the ClearLite.
•
Do not modify the installation from within (or outside) the assembly, and do not tamper
with any user-operated devices intended to reduce the risk of fire, electric shock, or injury
to persons; and warn against tampering with such devices.
•
Any servicing should only be done by a qualified service person.