Akiyama CDJ-MP32 Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Програвач компакт-дисків Akiyama CDJ-MP32. Akiyama CDJ-MP32 16 сторінок. Professional

Друкувати сторінку

PART NAMES AND FUNCTIONS

CONTROL UNIT

1. SHUTTLE/JOG WHEEL

can quickly scan forwards and backwards. Turn the Shuttle-wheel to the right

in order to scan forwards and turn it to the left in order to scan backwards. The

further you turn the Shuttle wheel the higher the scanning-speed.

Pause-mode: In the pause-mode, the current frame is repeated as soon as you

turn the Shuttle-wheel.

Playback-mode: Via the Jog-wheel, you can temporarily adjust the playback-

speed by +/- 16 %.

Pause-mode: In the pause-mode, the current frame is repeated as soon as you

turn the Jog-wheel. Via the Jog-wheel, you can slowly search within a title

forwards and backwards. In this way, you can easily find a Cue-point for

example.

Turn the Jog-wheel to the right in order to search forwards and turn it to the

left in order to search backwards. The faster you turn the Jog -wheel the higher

the searching-speed.

2. LIQUID CRYSTAL DISPLAY (LCD)

all the functions (play, pause, cue, etc..,), as they occur. This display is

viewable at several comfortable angles as described on. The LCD icons will

be described in the next section.

3. PITCH SLIDER

- This slider is used to adjust the playback pitch

percentage when the PITCH function is activated. The slider is a set

adjustment and will remain set until the pitch slider is moved or the PITCH

function has been turned off. The maximum pitch range of the slider is +/-

16%. This adjustment can be made with or without a CD in the drive. The

pitch adjustment will remain even if a disc has been removed, and will reflect

on any other disc loaded into the unit. That is to say, if you set a +2% pitch on

one disc, remove that disc and insert another, that disc will also have a +2%

pitch. The amount of pitch being applied will be displayed in the LCD. Use

this slider to match the BPM's of this unit to that of another music source. By

changing the pitch of one disc with respect to the other in this way, the beats

can be matched.

- This function allows you to set the starting point of a

4. LOOP IN BUTTON

loop.

5. OPEN/CLOSE

(Disc Tray Open/Close) - This button is used to open and

close the disc transport tray door. NOTE: When a disc is loaded, the tray will

not open unless the unit is in pause or cue mode.

6. +10 TRACK SKIP

- This button allows you to skip ahead by 10 tracks.

Example: if you are at Track #1, pressing this button will skip you to Track

#11, press the button again, it will skip to Track #21. If there are not that many

tracks, it will go back to Track #1.

7. SGL/CTN

- This button allows the unit's play mode to change between

Single and Continuous. In single mode the unit will play a single track and

return to cue mode. In continuous mode the unit continues to play track by

track.

8. PITCH PERCENTAGE SELECTOR

of 4%, 8%, and 16%.

- The TIME button is used to changed the displayed time values.

9. TIME

Time can be displayed as elapsed track time, remaining track time, and total

disc remaining time.

10. TRACK BUTTONS

TRACK BUTTON

- This button is used to select your desired track.

Tapping this button will forward skip to the next track, holding down this

button will rapidly forward skip through the tracks on your CD.

TRACK BUTTON

- This button is used to select your desired track.

Tapping this button will skip backward to the previous track, holding down

this button will rapidly skip backward through the tracks on your CD.

11. LOOP OUT BUTTON

loop. A loop is started by pressing the IN BUTTON , pressing the OUT

BUTTON set the loop ending point. The loop will continue to play until the

OUT BUTTON is pressed once again.

- Use a std. Mini plug (stereo) to plug in Side1 to Side

12. RELAY BUTTON

- Playback-mode: Via the Shuttle-wheel, you

- This high quality LCD Indicates

- Choose from pitch percentages

- This button is used to set the ending point of a

2. Set both sides of the CD player to single mode on the control. When Disc 1

ends the CD player will automatically change to Disc 2 and when Disc 2 ends

it will return to Disc 1,etc.

13. PITCH BUTTON -

off. The pitch functions of the PITCH SLIDER , PITCH BEND BUTTONS

and JOG WHEEL will not function without this function being activated. The

pitch slider and pitch bend buttons have a maximum range of +/-16%. The "+"

and "-" pitch bend buttons have a maximum range of 16%.

14. PITCH BEND BUTTONS

(-) PITCH BEND - The (-) pitch bend function creates a momentary "Slow

Down" in the CD's pitch speed (Beats per minute - BPM) when the PITCH

function is activated. This functions allows the beats between two CD's or

any other music source to match. This is a momentary function. When the

button is depressed the pitch speed will automatically return to PITCH

SLIDER'S selected pitch. Holding down this button will give a maximum of -

16% pitch. Be sure to remember that this function is a momentary pitch

adjustment, for a more precise adjustment use the PITCH SLIDER'S to match

the BPM's with another playing music source.

(+) PITCH BEND - The (+) pitch bend function creates a momentary

"BUMP" in the CD's pitch speed (Beats per minute - BPM) when the PITCH

function is activated. This functions allows the beats between two CD's or

any other music source to match. This is a momentary function. When the

button is depressed the pitch speed will automatically return to PITCH

SLIDER'S selected pitch. Holding down this button will give a maximum of

+16% pitch. Be sure to remember that this function is a momentary pitch

adjustment, for a more precise adjustment use the PITCH SLIDER'S to match

the BPM's with another playing music source.

15. SEARCH BUTTONS

backwards through a track.

forwards through a track.

16. RELOOP BUTTON

actively in LOOP mode (a loop is not playing), pressing the RELOOP

BUTTON will instantly reactivate the LOOP mode. To exit the loop, press the

LOOP OUT BUTTON.

17. PLAY/PAUSE BUTTON

causes the operation to change from play to pause or from pause to play.

While in play mode the green play LED will glow, and while in pause mode

the green play LED will flash.

CUE - Pressing the CUE button during playback immediately pauses

18.

playback and returns the track to the last set cue point. The red CUE

BUTTON LED will glow when the unit is in cue mode The LED will also

flash every time a new CUE POINT is set. The CUE button can also be held

down to momentarily play the CD. When you release the CUE button it

instantly returns to the last set CUE POINT.

19. CONTROL START SOCKET

using a 3.5mm jack plug to give remote start capability. When the switch

contacts are shorted the respective unit will play, and similarly when the

switch contacts are open the player will be in pause mode.

20. CONTROL CONNECTOR

connector on the main unit using the included control cord.

c d j - m p 3 2

This button is used to turn the pitch function on and

This search button allows you to quickly scan

- If a LOOP has been made, but the CD Player is not

- Each press of the PLAY/PAUSE BUTTON

- These sockets are to connect to a mixer

- Connect this connector to the REMOTE