ClearOne BMA 360 Посібник із швидкого старту - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Мікрофонна система ClearOne BMA 360. ClearOne BMA 360 5 сторінок.
Також для ClearOne BMA 360: Посібник із швидкого старту (9 сторінок), Посібник з монтажу (2 сторінок)
Друкувати сторінку
BMA 360
Hard Ceiling
For hard ceilings, ClearOne offers both a recessed-mount kit and a surface mount kit. Installation information is available
in the following two guides:
BMA Recessed-Mount Kit Installation Guide
•
BMA Surface-Mount Kit Installation Guide
•
VESA
The BMA 360 incorporates a VESA-mount hole pattern that supports pole mounting.
Connect the BMA 360
Connect the BMA 360 to the CONVERGE Pro 2 unit via P-Link connections CAT6-23AWG solid core RJ45 cables.
Warning:
Power over Ethernet (PoE) equipment used with a BMA 360 must meet the IEEE 802.3af, 802.3at or 802.3bt
•
standards.
When speakers are connected, you must provide power via the PoE++ port on the BMA 360.
•
Important: Please note the following PoE requirements:
No speakers: 36W PoE, connected via P-Link or PoE++
•
Speakers: Requires 90W PoE or 70W PoE. Must be connected via direct PoE++ port on the BMA 360.
•
ClearOne recommends the following PoE power supply kits:
36W: ClearOne part number: 910-3200-202
•
70W: ClearOne part number: 910-3200-207
•
90W: ClearOne part number: 910-3200-209
•
On the BMA 360 back plane, make the following connections:
1. If you have not already done so, connect the external speakers to the BMA 360.
2. With a CAT6 cable, connect the BMA 360 P-Link In connector to the CP2 P-Link Out connector.
3. With a CAT6 cable, connect the BMA 360 PoE++ connector to the PoE injector.
CP2
BMA 360
1
5
2
3
PoE Injector
Quick-Start Guide
Note 1: International Version
(Part No. 910-3200-208-I)
P-Link input port is shown in
the drawings. US Version (Part
No. 910-3200-208-U) P-Link
input is accessed through a
permanently connected CAT 6
pigtail cable that is terminated
with an RJ-45 receptacle.
QSG-0086-001v1.1 March 2021