ClearOne TeachCam Посібник з монтажу та експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Камера спостереження ClearOne TeachCam. ClearOne TeachCam 10 сторінок. Video presentation camera
Також для ClearOne TeachCam: Посібник користувача (12 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку6
To connect camera to a computer
When connecting to computers, ensure that the video capture card and all necessary
software programs and drivers are installed correctly. Consult the user manual for
your video capture card or USB adapter for instructions on connecting the camera.
Using the Camera
General usage
Turning on the camera
Turn on your camera with the on/off switch located at the base of the gooseneck.
Positioning the camera
The camera head is swivel mounted. Do not turn it past the natural resistance. Adjust
the flexible gooseneck (maximum 90°) until the camera is aligned with the subject.
Using the microphones
A highly sensitive microphone is located under the lens on the camera head. Audio
levels are optimal when the camera is pointed toward the person speaking, at an
arm's distance away. If the speaker's image moves out of the picture, the sound level
will begin to drop off.
Focusing the image
Check the contrast, brightness, and white balance of your monitor or screen before
focusing your subject in the presentation room.
Turn the focus ring to the left for close-up, right for distance.The FlexCam camera
includes a larger focus ring. Attach the focus ring by carefully pushing the smaller
end of the ring onto the focus knob at the center of the camera head. (The focus ring
will not be flush with the camera head.)
Displaying the image
On a TV
When the camera is properly connected to the TV, switch the TV to video mode.To
change to video mode, use either the switch on the TV front panel or press the corre-
sponding button on the remote control. Consult the owner's manual that came with
your TV for information on changing to video mode.
Not all TVs have Video Inputs. If your TV only has an Antenna input, you will need a
Modulator or a VCR with video inputs.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Using the Camera
Using the Camera
With a VCR
Put the VCR in the video-in mode (consult your owner's manual for instructions).
Turn the camera power on.Turn the VCR/TV switch to VCR and the TV to either
channel 3 or 4 (whichever is not used as a broadcast station in your area).
Using the microscope adapter and couplers
The microscope adapter kit includes a custom metal eyepiece adapter with 28mm
and 34mm plastic couplers.To use the custom eyepiece adapter, remove the micro-
scope eyepiece and replace it with the custom eyepiece adapter by sliding the narrow
end into place in the microscope. Gently push the 8mm C-mount lens into position.
Plastic couplers (28mm and 34mm) can be attached to a microscope by placing the
coupler over the microscope's original eyepiece.Turn the C-mount lens to the right
before placing in the coupler for viewing. Please note that the IDCam and FlexCam
do not have a microscope adapter or couplers.
Using the TeachCam
About the IllumaSlides
Five IllumaSlides are included with the TeachCam. Remove the cover on the slide
and add various specimens, such as drops of pond water, for viewing.To use the
IllumaSlides, attach the camera bracket to the bottom of the gooseneck. Place the
camera head into the camera bracket and turn on the IllumaBase. Place the
IllumaSlide on the top of the IllumaBase and adjust the focus as needed.
About the IllumaBoxes
Two IllumaBoxes are included with the TeachCam.The rectangular plastic box holds
laboratory specimens for viewing.To use the IllumaSlides, attach the camera bracket
to the bottom of the gooseneck. Place the camera head into the camera bracket and
turn on all the IllumaBase lights. Place the specimen in the box and close the box lid
tightly. Next, with cover side up, insert the plastic box lengthwise into the IllumaBase
and adjust the focus as needed.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
7