ClearOne Unite 200 Посібник із швидкого старту - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Камера спостереження ClearOne Unite 200. ClearOne Unite 200 6 сторінок. Ptz hd camera
Друкувати сторінку
UNITE® 200 PTZ HD Camera
5
720p50
D
6
1080p30
E
7
1080p25
F
Start Up
1. If you are not using the PoE Splitter, connect the AC power adapter to a power source.
2. On the back panel of the UNITE 200, set the Power Switch to On.
When the camera starts, Pan-Tilt rotates to the maximum position of top right, then returns to the center position. This
completes the initialization process.
Note: If the position preset 0 has been stored, then after initialization, the position preset 0 is called
up.
If you want to restore the factory default settings:
a. Press the Menu button to display the On-screen Display (OSD) menu.
b. Select Menu >Restore Default > Restore.
c. Set the value Yes, then press the HOME button.
IR Remote Control
Note: Power consumption in standby mode is approximately half of the normal mode
More detailed information about using the UNITE 200 PTZ HD Camera is provided in the UNITE 200 User Manual,
available in the
ClearOne Resource Libary.
7
-
-
-
Standby Button
• Press this button to enter standby mode.
• Press it again to enter normal mode.
Position Buttons - to set or call a present
Zoom Buttons
• Slow Zoom: Zoom In [+] or Zoom Out [-] slowly
• Fast Zoom: Zoom In [+] or Zoom Out [-] fast
QSG-0128-002v1.2 September 2021