Alton EVOLUTION EVSTA1208M Інструкція з експлуатації - Сторінка 11

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Комплект для теплиці Alton EVOLUTION EVSTA1208M. Alton EVOLUTION EVSTA1208M 18 сторінок. Aluminium staging and shelving

Staging Extension

Join at A-frame
Once you are happy with the
positioning of the staging arms
you can start to fit the staging
slats. Place these upside down
on the staging arms, Insert 1 bolt
into the channel (diagram 10) for
every arm. Now turn the first slat
over and locate the bolts with
the arms, start at one end loosely
fitting the nuts to the bolts.
Repeat this for the second slat
(diagram 16). You now need to
make sure everything is square
and in line (diagram 11) then
tighten all the nuts on the
staging. You can now repeat this
for the remaining slats.
Diagram 16
11
It is very straight forward to fit the
staging past an A-frame. With
the staging extension pack you
will find an extra wide staging
arm, this is also shorter than the
others supplied so should be easy
to spot. Measure up from the
floor as you did before and attach
the small bracket. Now fit the
staging arm with a diagonal
support. Bolt the arm to the
small bracket and screw the
support to the A-frame side bar.
Make sure this is level front to
back and also level with the next
staging arm along.
50mm