3form SimpleSpec 200.62-ILTUO Посібник з монтажу - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з монтажу для Офісне обладнання 3form SimpleSpec 200.62-ILTUO. 3form SimpleSpec 200.62-ILTUO 13 сторінок.
Друкувати сторінкуReady To Go
SimpleSpec 200.62-ILTUO
Installation
1
Drill Pilot Holes (�48)
a
Two standard template parts will be provided;
a base plate template (3-15-2160) and a corner
template (3-15-2340). The base plate template
has hole locations for drilling. Spacers will also be
provided, unique to this configuration; cut to size
based off post dimensions in the quoting phase.
Layout the whole floor plan
using the template.
b
Following the ILTUO Installation Template, drill pilot
holes. Use appropriate pilot hole diameter and depth for
the type of substrate you are fastening to.
*3form stocks the drill bits required for the concrete
and wood pilot holes. If you wish to purchase a drill bit,
please contact your 3form sales representative.
2
Assemble Vertical Posts (�12)
For more information, please visit 3-form.com or call 800.726.0126
December 2018 | mAN-rTG-200-62 | reV 002 © 2018 3form, Inc. All rights reserved.
ILTUO Installation
Template - Base Plate
3-15-2160
Substrate
tm
Installation Manual
ILTUO Installation Template
- Template Spacer
3-15-2347
ILTUO Installation
Template - Corner
Ø
Drill Bit
concrete
8mm
3-15-2350
Wood
3/16"
3-15-2335
( 2) Screw
ILTUO
-
-
Base Plate
-
-
ILTUO
Base Plate
-
-
3-15-2340
Depth
Anchors
min 4.3"
3-15-2309
min 3.5"
3-15-2310
( 2) Screw
-
-
6