ClearSounds A300 Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Телефон ClearSounds A300. ClearSounds A300 2 сторінки. Dect 6.0 expandable handset
Також для ClearSounds A300: Особливості (1 сторінок)

Друкувати сторінку

PARTS CHECKLIST

CORDLESS

PHONE BASE

BATTERIES

CARRYING CLIP

USER'S MANUAL

AC ADAPTER

REGISTERING ADDITIONAL HANDSETS

The supplied handset is already registered to the base unit,

and you can register up to 4 additional handsets to the base.

1. Before registering an additional handset to the base, you

should press and hold the page key

on the main base, for about 5 seconds and then release it.

2. Press the Menu soft key on the handset you are registering

to display the main menu list.

3. Press up

or down

to scroll to Registration and then

press the Select soft key.

4. Press up

or down

to scroll through the base list and

select one of the bases and then press the Select soft key.

The handset will search for the requested base.

5. If the handset is successfully registered, you will be

prompted to enter the PIN code (the default PIN is 0000).

Upon validation of the PIN, the Registration tone will

sound and the base assigns a number to the handset.

More information on this feature located in the Operating

Manual on page 17.

1. CHECK PARTS LIST

HANDSET

2. PHONE INSTALLATION: The phone should be located

in an area where it is easy to see the visual display and

lighted ringer. The phone may be placed on a shelf or table

or may be fixed to the wall. Begin by removing the clear

plastic Caller ID protective tab. This film tab is only

for display and to protect your Caller ID display during

shipping.

Desk / Table Mounting

1. Plug the AC power adapter into the

jack on the bottom of the base,

then plug the AC adapter into a

standard electrical outlet or

surge protector.

NOTE: The adapter is required for

the phone to work.

Installing Batteries

batteries come with your phone.

batteries before using your phone.

1. Remove the battery compartment cover by sliding it

downwards.

2. Insert the new batteries.

battery polarity as imprinted on the inside of the

compartment.

3. Replace the battery compartment cover by sliding

upward until it clicks into place.

NOTE: The batteries need to be replaced if they do not

recover their full storage capacity after recharging. Check the

, which is located

battery icon on the LCD to see the battery charge level. When

replacing the batteries, always use good quality Ni-MH AAA

re-chargeable batteries.

If at any time you have questions about your

telephone after reading this manual, please

contact our ClearSounds

CONNECTING YOUR PHONE

Bottom of base

Three AAA re-chargeable Ni-MH

You must install the

Be sure to observe

Customer Service

Department at 1-800-965-9043.

LOCATION OF CONTROLS

Figure 1

12 Dial/Speakerphone Key

1 Visual Phone Ringer

13 Left/Intercom Key

2 (4) 1-Touch Memory

14 Left Soft Key

Dial Keys

15 Up/Caller ID Key

3 Large LCD/Caller ID Screen

16 Earpiece

4 Right Soft Key

17 Carrying Clip

5 Right/Redial Key

18 Speaker

6 End Key

19 SOS Key

7 Down/Phonebook Key

20 Screw Eye

8 Hash (Pound) Key

21 Battery Compartment

9 Microphone

Cover

10 Star Key

11 Lighted Keypad

22 Charging Contacts

MEMORY KEYS

Dialing from the Memory M1 – M4 and SOS keys

Press one of the M1 – M4 or SOS memory dial keys and the

phone will automatically begin to dial (Page 30 of the Operating

Manual describes how to program the memory dial keys).