Aimpoint Acro C-2 Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Монокуляр Aimpoint Acro C-2. Aimpoint Acro C-2 12 сторінок.

2.3 Install the sight

To install the sight to an interface compatible with the

integrated mount shown in Fig. 1, follow the described

procedure:

a Loosen the screw (5) using the Torx T10 of the Aimpoint

tool (8D) and clamp the locking bar (4) around the

dovetail interface.

b With the recoil stop positioned in a recess, push

the sight forward (toward muzzle) and tighten the

screw (5).

c Tighten the screw (5) until a light resistance is

encountered. Proceed with another 1/4 to 1/2 turn until

fully tightened (MAX. 3 Nm / 2.2 ft·lb).

d Retighten the screw (5) after initial firing to ensure the

sight is securely fastened.

CAUTION: Do not overtighten.

2.4 Zeroing

CAUTION: Do not continue to adjust windage and

elevation screws (6) (7) if you encounter resistance.

a Adjust the intensity to a comfortable setting for the red

dot to contrast clearly against the target.

b Use the Torx T10 of the Aimpoint tool (8D) to turn the

adjustment screws (6) (7).