ClearSpan 105706 Посібник - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник для Намет ClearSpan 105706. ClearSpan 105706 19 сторінок. Party tent

CLEARSPAN™ CANOPIES

ADDITIONAL PARTS IDENTIFICATION NOTES

In some instances, there can be differences between the

parts that are shown and referenced in the instructions

and the parts that are shipped with the shelter. These

differences do not affect the integrity of the shelter, but can

change the assembly procedures.

The information that follows identifies possible changes in

the assembly procedure found in this instruction document.

Please implement these changes during the assembly of

the shelter.

3-Way Coupler (no lock bolt)

4-Way Coupler (no lock bolt)

There can be two types of couplers used during the assembly of the shelter: those that include an installed locking eyebolt

and those that do not. See above.

If the couplers included with your shelter do not have an installed lock bolt, use a self-tapping Tek screw to secure the

different pipes to the couplers during the assembly process. The self-tapping Tek screws are included with the shipment.

ATTENTION: Tek screws are sent with all shelters of this type. For couplers with locking eyebolts, install the Tek screws at

each pipe connection for additional security if desired.

WARNING: To prevent personal injury and damage to the shelter, fasten and tighten a Tek screw at each pipe and

coupler joint.

To prevent cover damage, install the Tek screw so that it does not touch the main cover or any optional side or end

panels once these are installed.

3-Way Coupler (includes lock bolt)

4-Way Coupler (includes lock bolt)

Revision date: 07.21.08