Bambi MD225/1000 Посібник оператора Посібник оператора - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник оператора Посібник оператора для Діапазони Bambi MD225/1000. Bambi MD225/1000 20 сторінок.

Safety Precautions
What you must do
•
Read these instructions before using
your air compressor.
•
Ensure the compressor has been
installed, electrically connected
and piped in by a properly qualified
person.
•
Ensure the compressor is kept
upright at all times.
What you must not do
•
Do not attempt any maintenance
on the compressor until it has been
isolated from the power supply.
•
Do not attempt any work on the
compressor until the air receiver
and pipe work systems are
depressurised.
•
Compressed air is dangerous if
misused and can prove fatal. Avoid
any bodily contact with compressed
air.
•
During operation the motor will
become quite hot to the touch.
Avoid contact to prevent burns.
At no time must the oil temperature
be allowed to exceed 100°C.
•
Never tamper with the pressure relief
valve.
•
Never change the oil when the
compressor is still warm. Take
necessary precautions to avoid
contact with the skin.
Electrical Connections
All 220/240 volt compressors, except Model 225/1000 are supplied with a moulded
plug in accordance with national standards.
Never remove the moulded plug.
Wired in accordance with European Standard –
Blue = neutral
Brown = live
Model 225/1000 requires a dedicated 20 amp power supply.
Bambi SB42/46 compressor oil does not
contain hazardous components and is
not required to be labelled dangerous,
according to the Classification,
Packaging and Labelling of Dangerous
Substances regulation:
[CPL]Regulation 1984
Siting The Compressor
What you must do
•
Provide adequate protection from
the weather.
•
Site the compressor level in both
planes.
•
As larger models are heavy, ensure
the surface has sufficient load
bearing capacity.
•
Allow access for maintenance all
around the compressor.
•
Site in a dry area, avoiding damp or
humid conditions. The site must be
dust free, well ventilated and have
a cool ambient temperature. 35°C
should be regarded as the maximum
allowable ambient.
What you must not do
•
Enclose the compressor or allow
hot air generated by the motor to re-
circulate around the compressor.
Yellow & Green Stripe = earth
1