Dixon Automatic Tool SKC-PTA-BE120 Посібник з експлуатації та технічного обслуговування - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з експлуатації та технічного обслуговування для Викрутка-шуруповерт Dixon Automatic Tool SKC-PTA-BE120. Dixon Automatic Tool SKC-PTA-BE120 17 сторінок. Automatic industrial cordless brushless power torque screwdrivers
Друкувати сторінку2.Buttons on panel:
Button
Power wake up
UP
DOWN
Set / Select
Reset
UP
+
+
DOWN
Power wake up
+
+
Set / Select
Description
Press P to wake up sleep mode screwdriver.
In setting mode, press up to select and change value.
1. In setting mode, press down to select and change value.
2. Press and hold for 5 seconds to turn of counter function and turn off
display. Press and hold again for 2 seconds to resume counter function.
3. Press and hold for 3 seconds to clear counting.
1. Press and hold for 3 seconds to enter setting mode.
2. Press Set/Select in setting mode to go to next setting.
3. When NS triggered, press Set/Select to unlock.
Reset
Press R to reset (factory default setting).
Up+Down (switch to connect to wireless controller)
1.
Press up and down simultaneously for 10 seconds to connect
screwdriver to KL-WSCBSN. At this moment screwdriver settings
must be set from KL-WSCBSN.
2.
Press up and down simultaneously for 10 seconds to disconnect
screwdriver and KL-WSCBSN.
*Screwdriver default set as disconnected to KL-SCBSN.
Power wake up + Set / Select
Press simultaneously for 5 second to enter learning mode.
10